February 6th, 2009

Standalone XBee

standalone XBEE

In most of the projects the XBee modules appear as interfaces, serving only for the wireless connection, but the they can do much more, they have seven analog input channels, nine digital I/O channels and two PWM outputs, it is almost like a micro controller the difference is that you can’t actually load your own control firmware, this needs to run on the PC, but this can be taken as a feature used in your advance since you can make complicated applications in any language and communicate over the serial port. The USB to serial converter should be a problem because the operating system will use it as a virtual serial port, no USB programming required.

With this advanced inputs and outputs you could make complicated robotics applications, smart sensors, and even closed loop systems, not being limited by the code size and speed only your imagination is the limit.

These features of the XBee are available only with the latest firmware version 10A1, if your module is older than you need to update the firmware.

Standalone XBee: [Link]

February 5th, 2009

XBee breakout board

XBEE breakout board

This is a popular and simple breakout board for XBee, optimized for breadboard mounting and gateway applications, in other ways when you use it only as an interface. It can be directly connected to the FTDI cable or to a de-chipped Arduino board, the breakout board has all the components needed to interface with 5V boards, don’t forget that the XBee needs 3,3V.

There is also a detailed tutorial how to install and use the usb to serial converter and how to configure and test the XBee module, where you can set the XBee parameters which are also explained in details.

Great guide, you can’t go wrong using it.

XBee breakout board: [Link]

February 4th, 2009

XBee with Arduino

XBEE with Arduino

More and more applications are emerging with the XBee module, and the Arduino developers are the most dynamic users, but most of the projects take some basic things as granted, like connecting the two boards. Since the XBee needs 3,3V and all the inputs must be limited to 3,3V otherwise you can damage the XBee module and the outputs will deliver no more then 3,3V which can lead to communication problems. The project presented here solve this problem and gives you two solutions one with voltage level translators and one with a simple resistive divider.

Beside the schematics you will find a step by step tutorial how to make the connections and the configurations, and ideas for future improvements, like using a switching regulator or a rechargeable Li-ION cell.

Before you make any XBee project, my advise is to read trough this interfacing tutorial.

XBee with Arduino: [Link]

© 2007-2011 YourITronics | Any logo, trademark and project represented here are property of their respective owners | Wordpress | Privacy Policy    RSS