April 7th, 2008 3 channel RF remote control
This is a 3 channel RF remote control project.The transmitter powered by 3V .This remote control I use PIC12F509 from Microchip which is a 8-pin single-chip microcontroller designed for low pin count applications with 1 K words flash memory and 41Byte SRAM and some special features such Power-saving Sleep mode,Wake-up from Sleep on pin change.
3 channel RF remote control: [Via] - [Link]
April 7th, 2008 at 1:50 pm
Hi there,
What communication protocol do you use for this thing? I’m trying to build something like this too, but I dont seem to get the USART to work on my PIC16F628A. Can you post some codes?
Thanks.
April 7th, 2008 at 1:54 pm
Hello and welcome to youritronics, here is a link with version 1.1 of the source code http://www.coolcircuit.com/project/rf_remote/3CH_RF_remote_11.zip
August 27th, 2008 at 2:08 am
I have two questions.
1. I see you have 0.1uF capacitor. What voltage is that capacitor?
2. You use Diodes D1 and D2. What are the Diodes model number?
Coolcircuits