April 26th, 2008 Garage Door Control System (or any device radio control system)
This project uses an ATmega16 and a radio control kit to get the job done. You can control up to four servo(motors) with a simple push of a button. The system can also control a servo with a photocell, for example if you enter its range it will turn on a light. Of-course there are a few commercial alternatives but the price is quite high and many of them are not a versatile as this one.
Garage Door Control System (or any device radio controll system): [Download Project] - [View Project PDF] - [Via]
August 25th, 2008 at 12:07 am
Hi, a great project published in a really fantastic site.
Allow me a coment about this project. Seems to be an error in the schematic. The 120Vac line that comes from pin 2 of JP5 has a connection to Ground. I’m building your project for my garage door that’s why i noticed.
Keep on the excelent work, rgds,
José
Porto-Portugal
August 28th, 2008 at 12:50 pm
I would like to do a project on door control system using embedded systems.so kindly give some assistace pls