May 21st, 2008 My first AVR code
This is my first AVR project. After going trough the tutorial i was telling you about a couple of days ago and after testing the “Blinky” project i decided to make my own Blinky. So i came up with this idea that the led’s should start lighting from the middle and move to the sides, when they reach the sides blink a couple of times and come back to the center.
I was actually quite easy to do it, i expected to be harder. I used the 8 LED board i designed in the avr butterfly starting guide.
Here is the LED’s in action:
Here is a zip archive containing both the source and the compiled hex. The code was written and compiled in AVR studio.
