This is just the expansion board and a 50 pin IDC cable to connect the two. To get it working you would also need the spectrum analyzer motherboard so this is for those who already have the motherboard purchased. If you don't have the motherboard you should buy the
Expansion Board Kit.
The Expansion Board works by switching the signals from the spectrum analyzer with the help of high current MOSFET transistors thus giving you the possibility to output higher voltages and currents at screw terminals placed on the sides of the board allowing you to run wires for each column and row to your custom setup.
This board is intended solely for advanced users with enough experience in electronics. You will have to do current and voltage calculations as well as allot of wiring to get this up and running, so if you don't have experience with electronics I doubt you will be able to get this board up&running.
The specs are:
- 12V 6A total current allowed.
- dimensions: motherboard 100x80x23 mm ,expansion board 110x100x21 mm with 4 mounting holes.
Before buying this we strongly recommend reading more about it at our forum.
This product was added to our catalog on Saturday 26 February, 2011.
.JPG "Expansion Board")
